Equipment For Cylinder Processing T2150-63

This machine tool is a special machine system for processing cylindrical deep hole parts, and is suitable for drilling and boring of cylindrical deep hole workpieces. When drilling, the indoors chip removing method (BTA method) is used, that is, the oil is supplied through the oil dispenser, and the chips are discharged from the inner of the drill pipe to the chip removal bucket at the rear of the bed by way of the cutting area. When boring, the end of the boring bar is used to provide oil, and the chips are discharged through the reducing area to the chip discharge hopper at the head of the bed.

The machine gadget mattress information rail is a rectangular guide rail, which has been quenched and has immoderate put on resistance; the feed screw is installed in the center of the mattress information rail. The oil dispenser makes use of a servo motor to tighten the workpiece, the pressure is adjustable, and it is protected and reliable. The oil dispenser spindle and the machine device spindle have high concentricity and top rotation accuracy; it is handy to change the guide sleeve. This machine system is a deep gap drilling and boring machine with effortless operation and control and excessive processing efficiency.